SETUP DOCUMENT - Roger E. Banning


Setup area is bytes E166 hex thru E1FF hex.

Specific locations of interest are:

E166 - IOBYTE:  40h = serial printer (default)
                80h = parallel printer
                C0h = IEEE printer

E167 - printer :  0 = standard serial (default)
                  1 = ETX/ACK (Qume)
                  2 = XON/XOFF (Diablo)

E168 - controls auto horizontal scrolling:  00 = OFF
                                            FF = ON

E169 - controls Baud Rate:  56 = 300 bps
                            55 = 1200 bps

E16� - control� scree� size� he� equivalen� o� �
       actua� scree� width� i.e� 80� � 128�
       50� � 80� 34� � 52.

E16� - startin� addres� o� ke� � content� (alway� �
       E1A5).
E16D - starting address of key 1 contents.
E16F - starting address of key 2 contents.
E171 - starting address of key 3 contents.
E173 - starting address of key 4 contents.
E175 - starting address of key 5 contents.
E177 - starting address of key 6 contents.
E179 - starting address of key 7 contents.
E17B - starting address of key 8 contents.
E17D - starting address of key 9 contents.

E17� - addres� pointe� t� 1s� arro� key� (up�        �
E18� - addres� pointe� t� 2n� arro� key� (right)
E18� - addres� pointe� t� 3r� arro� key� (down�  �
E185 - address pointer to 4th arrow key. (left)
E187 - end of table address.

       CP/�     - 0B,0C,0A,08
       WORDSTA� - 05,04,18,13

E189 - IEEE device address.

E18� - fla� indicate� i� printe� ha� bee� �
       initialized.
E18� - � o� byte� i� printe� initializatio� strin� �
       (ma� � 16).
E18C - E19B = printer initialization string.

E19C - auto command: 0 = ignore auto boot
                     1 = auto on cold boot (default)
                     2 = auto on warm boot
                     3 = auto on both
E19D - length of auto command (07)
E19E - E1A4 = auto command ('AUTOST ')
�
E1A5 - E1FF = key contents, arrow keys

Shoul� b� o� i� w� pic� u� thes� 15� byte� (E16� - �
E1F� an� store them as a key set.